Pulleys

[850cc racer]

Hi guys haven't posted in ages how are we all?

Combing pulleys that come out of boat for 90 degree angle like say the front of an F1.. Who would sell those? For wire not for rope

850

[ima75man]

Hi guys haven't posted in ages how are we all?

Combing pulleys that come out of boat for 90 degree angle like say the front of an F1.. Who would sell those? For wire not for rope

850

i have a set of pulleys,i sold my orange boat,i had kept all the hardware.also have all the other pulleys, for 5/32 stainless wire

[Powerabout]

Hi 850

How the mod 50 going?
Any chance you can get around to building me a cowl and lower pan?
Cheers
Powerabout

[hydroplay]

Harken makes a pretty complete line of hardware for sailboats and has some for wire. We use 3/32 7x19 SS wire on smaller CSH-CMH boats and don't use coaming pulleys at all, just a Delrin block. They work great and have negligable wear after years of service. No reason they wouldn't work on your rig. Years ago we ran Harken coaming pulleys and on the steering bar of our SST-120/140 stuff with 5/32 wire. You should be able to use 1/8 with no problems.

[Syd]

Brown Tool & Machine co. in NJ is where I bought mine. I am really pleased with mine and the service that I got from him.

[850cc racer]

Hey John, thanks for the reply i have looked at brown tool and machine and thats what im after, the pulleys look spot on! hows things?

Powerabout: i think i could do that. i have one i can take a mold off and a really good base plate. i have heaps of glass as i bought a 36kg roll when my mate was doing my boat, ill have a talk to him and see what we can do

Syd: champion exactly what i was looking for i had been on that site before however forgotten it!!

[Powerabout]

many thanks

these guys have stuff as well
http://wintechenginemachine.com/profast.htm