PDA

View Full Version : need info



mercrazy
01-29-2011, 01:32 PM
Is there a performance 60hp merc short shaft from the 1990's ....I have a guy that is trying to sell me a 60hp merc with "three big carb's" and its much more powerfull than the other 60 hp's.?? Can anyone comfirm this, i can't find any info on this motor.He thinks it's a 1993 and it has oil injection not sure if it's still a race motor.

Any info would help thanks

Hounddog
01-29-2011, 01:39 PM
Yes, there were several in the Toronto area. You want the 60 cubic inch short shaft [15 inch] model. I believe the first year was 1998. It came with a small foot and factory power trim. Jim Allen still has his. They are not a race motor, but they compete very well in T850 class, They also are very durable.

mercrazy
01-29-2011, 01:41 PM
What is a motor like this worth to buy??

Hounddog
01-29-2011, 01:46 PM
The cost would be $1800.00 to $2400.00. Make sure you are not buying the 52 cubic inch model. It came out about 1992.

mercrazy
01-29-2011, 01:51 PM
what identifing marks should i look for to be sure its the good one.
Thanks

Hounddog
01-29-2011, 04:29 PM
Same as any used outboard. The year. History from owner. Number of hours use. Repairs done. What type of boat it was run on. Appearance...paint wear on gear case...
wear on flywheel and starter drive..appearance of power head does it look clean. Physical tests.. Feel the crank by moving the flywheel back and forth..is it tight?..any free play?..does it rotate smoothly?..do a compression test..check the lower unit gear lube for water.. take the prop off and make sure the prop shaft is straight. Water test it on a boat if possible. If you are not outboard knowledgeable take someone with you who is.
Remember new is always new.
Used can be barely used to completely used up.
Parts are expensive and labor even more expensive if you need to repair it.
To-day marinas usually part out older motors needing repair. They cannot get their
costs back in selling a motor they do a major repair,

Check the market place to see what similar motors are selling for. The asking price can be much different to the sell price. Like all things it is the price that someone or some people are willing to pay. A fair price is a good price for both parties..