Wanted, pics of the UK Mod50 15"

[Fast Fred]

thare was such a thing, thinkin it was a FR-19s powerhead. :cool:
not the FR-31s, but whatchyagot :cool:

[onwatermarineservices]

Hello Fred,
Not sure about in Europe, but here in Aus the V6 crossflow CCC when sold as a Johnson had NR19S stamped on the model number plate and the latest 3 Cyl OMC race engine was called an M-31.

[Fast Fred]

ever see an fr-31s 15" over thare? thats the last one with the starboard exhaust, most power full of the three. :cool:

[onwatermarineservices]

Yep, A friend of mine is racing one in our F2/3 series. There are about 5 of them running over here. These are an awsome engine and as it is now if you are not using one of these then you are just taking up racing room. If you want I'll see if I can get some pics of his engine.
Cheers
Des Maslen

[Fast Fred]

YA, way cool, thay kill everything right, yup thats it. thanks

[Fast Fred]

hey over thare ONWATERMARINESERVICE, still thinkin we mite get some shots? :cool:

[onwatermarineservices]

Beeeeee patient my young jedi, I have to get to my friends place this weekend to take pics, and drink some beer and take pics and drink some beer and drink some beer and take some more pics no drink some more beer. Then I can post them for you.
Cheers Des Maslen
Owner and driver of "Australia's fastest Evinrude"

[Fast Fred]

:cool:

[onwatermarineservices]

I have pics but I can not seem to be able to upload them. I will try again to-night, I also tried to send them to David Woodell, but that didn't work either. Worst comes to worst then I'll save them to disk and send them over via snailmail.
Regards Des Maslen

[Mark75H]

email them to me at: Mark75H@aol.com

[onwatermarineservices]

Nope the sleever is another engine all together

[Fast Fred]

any body got a set of reed blocks for that front 1/2?, what size are them carbs?
never did see a mod50 exhaust adapter, totaly dry it looks, all the water is pulled out the back of the head? runin a one to one on thare? how fast? whats it on ? how many lbs or kgs?
thanks:cool:

[Fast Fred]

yes, i do have a set of them, had them sent to the shop, haven't seen them my self, looked the same,think i got a shot of the case cut out to fit the exhaust-hood, see if i can find it.:cool:

[Fast Fred]

was ya thinkin about sellin them thare plates David?:cool:

[David Weaver]

I'm going to try that exhaust system next year.

Since the C class is just about dead in Ar., La., Ms., and Tx., I bought a Super E (APBA FE) hydro. We usually have enough Super E's at every race. Now all I have to do is get the boat from Canada to Louisiana, paint it, rig it, build a powerhead, buy a tower, a lower unit, and a few props..... Nothin' to it. :confused: :rolleyes:

Would probably be a lot easier to buy a complete 250 Rossi or VRP...and cost about the same for similar speed.

[Fast Fred]

still hopefull for a pic of an FT mod50, (shiftable unit):cool:
Thanks:)