PDA

View Full Version : Orginal OMC 13 x 23" cleaver measurements?


Argo
10-15-2013, 12:48 PM
Do anyone have pictures of a original unmodified OMC cleaver made for the 3cyl stinger ?

I have 2 of them and both are modified by the earlier owner and i would like to know how much it has been filed down, i think that both have the blades thinned and one of them is modified otherwise alot. I am especially interested in the information about how thick the blades are orginally.

I will upload better pictures of the props later

g55147551485514955150
OUTBOARDER
10-15-2013, 05:53 PM
DAH Props has a wall of nothin but the Originals. I would look for a original sst-60 or Super E wheel.......................
Argo
10-15-2013, 09:47 PM
DAH Props has a wall of nothin but the Originals. I would look for a original sst-60 or Super E wheel.......................

Im not looking to buy a new prop, i have 2 that still are untested as the boat is not ready yet.

Im looking for the information on how much they have been modified by the earlier owner so i know how much un-original they are.
pdt
10-16-2013, 03:17 AM
what is the number stamped on your prop ?
there different ones, so without the number its going to be hard knowing what you have.

Might be a good idea to weigh the prop to see how much has been taken off, if any at all on the first pic.
the second one looks to have been butchered.
HankFrazier
10-16-2013, 08:28 AM
Do anyone have pictures of a original unmodified OMC cleaver made for the 3cyl stinger ?

I have 2 of them and both are modified by the earlier owner and i would like to know how much it has been filed down, i think that both have the blades thinned and one of them is modified otherwise alot. I am especially interested in the information about how thick the blades are orginally.

I will upload better pictures of the props later

g55147551485514955150
Somebody ruined the prop in the second picture.
Argo
10-16-2013, 09:40 AM
what is the number stamped on your prop ?
there different ones, so without the number its going to be hard knowing what you have.

Might be a good idea to weigh the prop to see how much has been taken off, if any at all on the first pic.
the second one looks to have been butchered.
Thats a good idea, i need to find an accurate scale so i can weigh them.

Both have the same number, must check it tomorow.


55151
55152
55153
55154
Fastjeff57
10-18-2013, 06:29 PM
Is that bite out of the blades intentional?

Jeff

PS: And it's Halloween time!
MWhite
10-18-2013, 07:00 PM
Is that bite out of the blades intentional?

Jeff

PS: And it's Halloween time!

Looks like to me it whack something hard.
Argo
10-20-2013, 10:23 PM
Is that bite out of the blades intentional?

Jeff

PS: And it's Halloween time!

It's been cut by the earlier owner, he told me it's been cut to make the boat drive more steady when driving over 60knots.
He told me it removes some chine walk, im not sure if it really helps as i have not tried it yet.
Fastjeff57
10-21-2013, 04:41 AM
Interesting! That "bite" out of the leading edge does look intentional.

Jeff