Skeg mod

[hupiveneilija]

Under construction is deeper and longer skeg with torquetamer feature.
Welding done with mig.

[hupiveneilija]

Its really hard to catch that shape to the screen!

[Fastjeff57]

I hope you angled it the right direction!

Nice work.

Jeff

[hupiveneilija]

Well, last finishing touch and painting. Finally ready!

[hupiveneilija]

Well, 1st testdrive behind. That bend trailingedge is too much so i grinded it off. Right side is now straight but still that wing profile is left.
It was so much that had to turn steeringwheel 20minutes to the left , so that boat went straight!😁. To be continued!

-J-

[hupiveneilija]

Jep, back in business! Skeg is now grinded allmost symmetrical for both sides. Seems that i dont need that wing effect at all!! New little larger but symmetric is on the way from welder, will get back with photos.

-J-

[Fastjeff57]

At least you tried something new, so you and others know it wouldn't work.

Kudoos for doing that, and nice welding work by the way.

Jeff

[hupiveneilija]

Thanks for saying that!
I have another under construction, straight but widened on every direction. Have to make sure it stays in line on rough conditions! Pics are on the way��.

-J-

[hupiveneilija]

Here new one welded.