nitrous and intake on tripple

[iwanajohnson]

was wanting to know anything anyone knows about puting nitrous on an omc tripple or yamaha tripple. what kinda reed mods need to be done or can be done with or without nitrous. wanting to do reed mods and possibly nitrous. on omc tripple.

[jphii1]

Call Chuck Goodman at Hydro Dynamics. He is THE nitrous guru.

[iwanajohnson]

got any contact info for him.

[Fast Fred]

fog it at the airbox.:cool:

[Tomtall]

Andrew - Here you go buddy. Good luck and let us know how it works out. I LOVE the juice! Ran it in all my muscle cars over the years. By the way GOOGLE is a wonderful thing.;)


http://www.hydrodynamics-usa.com/

[iwanajohnson]

was trying to decide how to do it, foging at the box, or I had thoght about drilling a hole that comes out right behind the reeds to shoot nitrous into. I'm gonna have to call hydro dynamics. thanks guys. if I decide to do it i'll tell yall bout it. in the process of trying to organize a boat or race club. see what kinda interest we get and if we get our rules set up before I decide what to build. thanks guys.

[Fast Fred]

fogin at the air box is the easyest, after the reed is for a Big hit, like Double time.:cool: goin up is easy, comin back down with out killin it is the Key.

[iwanajohnson]

so would fogging it at the air box require a dry kit right? what kinda kits can be used for outboards. and does running alcahol have much benifit. thinking of rebuilding the motor, lightening rods, pistons,crank and yes the flywheel(not worried about it comin appart), puttin in my finger ports, working on the transfer and intake, and putting some kind of nitrous system on it. wantin to learn what I can about it. nitrous and reed mod's are my big interest rite now.

[Fast Fred]

mite be best to make an air box and try it out on some stockers, NOS mangles
parts, yes alcohol as the inrichiner:cool: they make sled kits i'm thinkin, maybe jet skis too.:cool:

[iwanajohnson]

what thread did you show a picture of a nitrous injecting nozzle. I'm lookin at a dry sneeky peat system made by edelbrock.wantin to do it, just pinchin my pennies til the winter time and I'ma start on it. gonna hop over here and look at ths 90hp yamaha thread, wantin one of those maby.

[Fast Fred]

most likely that mod50 thred, thats a wet set up, also an All Out, just the tip of the injector sticks in after the reed block, a foger is way cheaper. just one injector is 90+$.:cool:

[JohnsonM50]

An in depth discussion on nitrous is here, covering what happens and how to make it work. It was stated that a motor will go real well on the way up but go dry when you let off [if I remember right.] Search back about a year or so.

[fyremanbill]

Do not use the nitrous without a fuel enrichment circuit like that Sneaky Pete. On a small 2 stroke, it'll seize before you can say "oh sh*t"
Use combination type nozzles in front of the carb venturis. A good starting point for jets is .020 on nitrous and .024 on fuel, 5 psi fuel pressure at WOT. Use higher octane fuel than normally required for your engine. If you want more power, call Chuck Goodman. Good luck.

[Fast Fred]

:eek: http://img259.imageshack.us/img259/6756/p5250008zi1.th.jpg (http://img259.imageshack.us/my.php?image=p5250008zi1.jpg)
and on a 2 stroke, to the FUEL you add oil:cool: Cuzz thats how they work.
http://img255.imageshack.us/img255/8043/p5250009yu0.th.jpg (http://img255.imageshack.us/my.php?image=p5250009yu0.jpg)
and to keep it from goin dry, when ya Lift off the NOS, let the in richment run on, for a set duration, maybe,ya, :eek: