Mod 50 Piston orders

[Phil McDaniel]

Need some more orders for pistons. Spread the word and contact me at Phil McDaniel 843-650-0400 home 843-446-7767 cell or rpms@sccoast.net
Thanks Phil

[OUTBOARDER]

OK guys, here's your chance. Let's get some orders placed so that Phil can have a run of these made.

Thank you for your support Phil, its people like you that keep this sport going!

[Phil McDaniel]

Need some more orders to make a run of pistons for 3 cyl. OMC's. Have half enough to order. Let me know as to the size and quantity needed. Phone #'s are in an earlier post. Thanks Phil McDaniel

[850cc racer]

Hey there Phil, im gonna need a set. thinking 0.20 over would be good :cool:

any pricing? im over here in aussie land so might even get like a set of 0.40's to put away :rolleyes:

[850cc racer]

phil, sent you a pm atfer you replied.. can you reply so i know what the go is?

thanks mate

[scud]

how much for a set of three pistons ,will you paypal? when will they be available. How much for rods new or used ? and wrist pin kits ?

[850cc racer]

Hey Scud, i know Phil doesnt get on here very much, he sent me the prices as i have ordered 2 sets.. i do know Pistons 100.00US each, rods are $80.00US each bearing kits are $20.00US Each...

Hope that helps..

not sure on paypal..

cheers

[scud]

thanks, If I may ask, how fast is your yellow boat with sst60 ?how high is the motor jacked and what prop ?

[850cc racer]

hey there scud.shes no sst60.
814cc 70hp block, with some port work, 65hp dome top pistons, FT head to suit. later style carbs, 2stage plastic reeds, 2-1 gear bag, 12 x 23 cleaver with hub added.. shes good for 75mph :cool::eek:

p.s. the centre of the gearbox is a few inches below bottom of boat.. really needs to come up a little.. but no one catches me so ill leave her how she is!

[Phil McDaniel]

Hey guys, Lost my sheet of paper as to who needs and wants to get in on the 3-cyl. OMC Mod. 50 type pistons. I have one man who may take enough to make an order. Help me out with your names and sizes/quantities again if you would. My phone #'s and info are a few post back. Thanks Phil

If I've contacted you by phone or e-mail in the last 24 you should be O.K.

[Phil McDaniel]

Pistons have been ordered. A special thanks for all those guys who made this happen. Will be in in about 2or 3 weeks and will have some extras available. Hope these will suit most everyones needs. THANKS AGAIN Phil

[Fast Fred]

any +.050's, could use some +.040's:cool:

[850cc racer]

Hey phil. any update on eta of the pistons?
will have to get 3 bearing sets off you. im good for rods. pm me or email.

cheers mate