Behind the scenes jet boat racing

[ravencrew]

Were going to make a series of these videos. Were going to tear down the boat explaning what goes into it and the steps of putting it back together. If you have any comments or questions could you please put them in the comments of the video. We plan on answering the questions and comments as we keep filming. Here is our first ideo. Hope everyone enjoys it.

http://www.youtube.com/watch?v=Qzjas9NJmzE

[river_ratj40]

great video, im excited to learn how these boats are made and perform. Keep up the good work

[ravencrew]

I just finshed the second video rather short just 3 minutes long. It should post shortly on Youtube.

[ravencrew]

Video #2
Jesse talks about bondo,spoons, and the bent bottom and how it affects the handling.

http://www.youtube.com/watch?v=uS_avUZlxhk

[ravencrew]

Grate and ride plate this one is short.

http://www.youtube.com/watch?v=7oeAkFvQWx4

[ravencrew]

Videos 4 & 5

Revisiting the spoon

http://www.youtube.com/watch?v=hIASUiuVK6o

Bottom and Bondo

http://www.youtube.com/watch?v=koJbf8xQGvE

[ravencrew]

Video #6 bondos final stage:

http://www.youtube.com/watch?v=KcsSNGzSUSI

[river_ratj40]

are you going to continue and show the paint process,

do you do any pump mods or impeller mods?

[ravencrew]

are you going to continue and show the paint process,

do you do any pump mods or impeller mods?

No paint since it's on the bottom of the boat a rattle can will work. Were going to start the process of the pump and setup with clearances hopefully next week. I'll keep you posted!

[ravencrew]

Here is Part 7 Chrunyk Nozzle: I also have the Riggins Idaho video finished and will be uploading it on Thursday afternoon:

http://www.youtube.com/watch?v=8CZLjzU-oX4