Some pics of the follow up work one on the front cover. After the gluing was completed, aluminum bolts were installed on both side of the cover, locktite-ed in, to keep the saddles secure. The top main required coming through the saddle and into the case because of the starter and distributor ears interference. The studs in the top saddle are also aluminum. Then cut nearly through with a slit saw so that they would not pinch and cut all the way through on the opposite side then broken off.
Attachment 51594Attachment 51595Attachment 51596Attachment 51597Attachment 51598Attachment 51599Attachment 51600Attachment 51601Attachment 51602Attachment 51603