Thanks Thanks:  0
Likes Likes:  0
Results 1 to 7 of 7

Thread: Carb velocity stack

  1. #1
    Team Member
    Join Date
    Feb 2024
    Posts
    2
    Post Thanks / Like

    Default Carb velocity stack

    Does anyone have a carb velocity stack for a single carb 35hp omc ?

  2. #2
    Team Member
    Join Date
    Jul 2015
    Posts
    6
    Post Thanks / Like

    Default

    I sell 2 designs. One with spot for the mixture adjustment in the front w/ a knob included for the older style carbs and one without. They work on 2 and 3 cylinders too. 3D printed Nylon with carbon fiber to hold up to the heat and fuel. $40 shipped with hardware. Pm me if your interested.
    Attached Images Attached Images   

  3. #3
    Team Member
    Join Date
    Feb 2024
    Posts
    2
    Post Thanks / Like

    Default

    Yes I would like to get one with the mixture screw hole

  4. #4
    Team Member
    Join Date
    Jul 2023
    Posts
    2
    Post Thanks / Like

    Default

    do you make these for Mercury and Yamaha Motors as well?

  5. #5
    Team Member
    Join Date
    Jul 2015
    Posts
    6
    Post Thanks / Like

    Default

    I have made a 2 sets for the Yamaha 30hp's. I have not done the Yamaha 40-60hp or Merc's yet. If I could get a hold of a carb for them and what space I have to work with when they are mounted then I can get one designed and printed pretty easy.

  6. #6
    Team Member
    Join Date
    Sep 2024
    Posts
    7
    Post Thanks / Like

    Default

    I haven’t used a velocity stack for that setup, but I’ve had good luck with aftermarket ones on my other engines. They definitely helped with airflow and made a noticeable difference in performance. If you're considering it, just double-check that it’ll fit your carb.

  7. #7
    Team Member
    Join Date
    Jul 2015
    Posts
    6
    Post Thanks / Like

    Default

    I originally designed these for the 3 cylinder Johnson / Evinrude 56ci motors. They gave more low and mid-range power but didn't see much gain on the top but I ran a jet so we are only turning 5500RPM. When I got my current motor, 31.8 ci 35hp (jet) they mounted right up. From what I have seen, these would fit 2 cylinder 45ci motors and others with the same carb body mount holes on the front but I have not confirmed that yet.

    The set of Yamaha 25/30hp stacks did add some power all through the RPM range. Mostly in the mid-range.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Yamaha 70 velocity stacks
    By Roflhat in forum Technical Discussion
    Replies: 5
    Last Post: 05-21-2014, 01:56 AM
  2. Velocity Stacks
    By DuckLn in forum Technical Discussion
    Replies: 7
    Last Post: 02-03-2014, 09:01 AM
  3. Velocity stacks
    By tyst67 in forum Technical Discussion
    Replies: 9
    Last Post: 01-05-2014, 03:38 PM
  4. FYI what does a 40H and a 20H carb flow?
    By Schiada in forum Technical Discussion
    Replies: 0
    Last Post: 09-21-2012, 10:56 AM
  5. dry stack or not
    By ultrafast30 in forum Technical Discussion
    Replies: 4
    Last Post: 07-29-2012, 02:48 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •